Water level control, Pump protecting, Automatic electric valve control
Other fittings of machine
CM230 X 2sets
Stainless steel 1set
Pipeline flow meter
Part Two: Semi-Automatic Blow Molding Machine (Model: HY-B-II) Specification:: HY-B-Ⅱ semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. * Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally. * The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. * The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. * The machine can be operated in the step-by-step mode and the semi-auto mode. * The machine is small with low investment, easy and safe to operate
Max. volume of mould product
Max. product capacity
Max. Heating power
Pressure of air supply
Max. mould dimension
Max. shifting mould dimension
Center distance between two bottles
Max. stretched length
Size Main machinine
Semi-automatic blow moulding machine
Infrared Heat Oven
High pressure air compressor
High-pressure Air Pipe
Spare parts and tools
Part Three: 3-In-1 Bottle Washing, Filling And Capping MachineModel: CGF8-8-3
CGF8-8-3 PET bottle Washing / filling / capping machine is a three-in-one combination of our advanced technology of atmospheric pressure filling technique, and it is the application of independent research and development, it will be the same with pure water and mineral water advanced bottling models. This machine adopts conveying way for clip bottles’ lips, only need to replace very few parts, it can be applied to a variety of bottle type, smooth delivery. Filling method is Atmospheric pressure filling.
* The main frame adopts structural steel, 304 stainless steel exterior layer, 304 stainless steel frame, round steel adjustable feet.
* Conveying system adopts star wheel, smooth transmission, stainless steel chain, it will be a smaller deformation.
*Number of washing clips is 8, 304 stainless steel chassis wash pipes are heat-resistant.
*Number of filling valve is 8, and parts contacted with product are 304L stainless steel. Inner surface is dealt with polishing. There is stainless steel returning tube, no dead space.
* Number of capping head is 3, screw head using magnetic torque device to facilitate torque adjustment, it can be set the size of the first torque of capping in accordance with the actual production needs.
* Main Motor and Gearbox with frequency controller, transmission for sports bodies are gears, run smooth, all-round star bottle components are engineering plastics, with security agencies.